Usb Connection; Mf Drivers & Mf Toolbox Installation - Canon imageCLASS MF4350D User Manual

USB Connection

• The following procedures are explained using sample screens from Windows XP Professional.
• The screen may differ according to the operating system, as well as the type and version of the
printer driver.
• Do not connect the USB cable before installing the software. If you connect the USB cable
before installing the software and the Found New Hardware Wizard screen appears, click
[Cancel].
• For Windows 2000/XP/Vista, log on as an Administrator to install the software.
• Make sure the machine is turned ON before connecting the USB cable.
• Click on the circled button on each screen to proceed to the next step.
• A USB cable is not included with the machine.
MF Drivers & MF
Toolbox Installation
1
Insert the User Software CD-ROM.
2
If the CD-ROM Setup screen is not
displayed, click [start] on the
Windows task bar → [My Computer].
Before Installation
Windows Vista: click [Start] on the
Windows task bar → [Computer].
Windows 2000: double-click [My
Computer] on the Windows
desktop.
Open the CD-ROM icon, then
double-click [MInst] ([MInst.exe]).
3
4
5 Set Up Computers and Software
If the disk space is insufficient to
install the software, an error message
is displayed. Free the disk space, and
then try again.
5
6
31