Using Macro - Keysight E4990A Help Manual

E4990A Help
0 Not used
1 Trace 1
Limit Test
Fail
2
Trace 2
Limit Test
Fail
3
Trace 3
Limit Test
Fail
4 Trace 4
Limit Test
Fail
5 to 15 Not used
Issuing the
*CLS
channel status event register.

Using Macro

Using Macro
Overview

Reading Data

Using Echo Window

Using User Menu

Using Form

Overview
Macro Using COM
•
Executing Macro from Softkey/Hardkey
•
324
Always 0
Set to "0" when a measurement cycle
begins;
set to "1" when the measurement cycle
finishes and returns "fail" as the limit test
result for trace 1.
Set to "0" when a measurement cycle
begins;
set to "1" when the measurement cycle
finishes and returns "fail" as the limit test
result for trace 2.
Set to "0" when a measurement cycle
begins;
set to "1" when the measurement cycle
finishes and returns "fail" as the limit test
result for trace 3.
Set to "0" when a measurement cycle
begins;
set to "1" when the measurement cycle
finishes and returns "fail" as the limit test
result for trace 4.
Always 0
command clears all the bits in the questionable limit