Exclusive Fixture - Keysight E4990A Help Manual

E4990A Help
1. Make sure that the
Adapter Setup
2. Perform the fixture compensation in accordance with
Compensation.
with the four-terminal pair configuration, neither user
calibration nor port extension compensation is required for
measurement (they cannot be performed).
Other topics about Calibration
D. Exclusive Fixture
When an exclusive test fixture is connected to the 7-mm port of the
42942A Terminal Adapter, which is connected to the four-terminal pair port
of the E4990A, and a device is connected to the test fixture, perform the
calibration procedure described below.
108
adapter selection
if it is not done yet.
When the measurement port is extended by 2 meter
is set to 4TP 2m. Perform
Fixture