Nortel 1150E User Manual page 49

Select
or
Configuring Area Code Setup
Use the Area Code Setup
an incoming call arrives with an area code that matches one of the three
stored area codes, the incoming call number is reordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number).
This reordering is also performed when you scroll through your Callers
List. To configure area codes, press the
Options, and select
To configure default area codes (maximum of three):
4. Choose one of the following:
— Press the
Cancel
— Press the
menu to save up to three area codes. When
Call Log Option.
1. Press the
scroll and highlight
2. Press the
3. Press the
scroll and highlight one of the following:
— Area Code # 1
— Area Code # 2
— Area Code # 3
4. Press the
Configuring Telephone Options
Select
configuration.
Cancel
existing configurations.
Services key, select
Up/Down navigation keys to
Area Code
Enter key.
Up/Down navigation keys to
Enter key.
soft key to save the
soft key to keep
Telephone
Setup.
49