Nortel 1150E User Manual page 15

parentheses indicates labels appearing on the key caps, for example,
(Services).
Fwd
Fwd
More..
Z
AutoAns
(Volume +)
(Volume -)
About the Nortel IP Phone 1150E
Soft keys are located below the display
area. The LCD label above each key
changes based on the active feature.
When a triangle appears before a soft key
label, the feature is active.
Press the More..
layer of soft keys (self-labeled).
The keys on either side of the LCD display
area are user-defined feature
labels on the LCD. These keys also function
as line (DN) keys.
A steady LCD light beside a line (DN) key
indicates that the line is active. A flashing
LCD light indicates the line is on hold or the
feature is being programmed.
A steady LCD light beside a feature key
indicates that the feature is active. A flashing
LCD light indicates that the feature is being
programmed.
Use the Volume control
the volume of the ringer, handset, headset,
speaker, and the Handsfree feature. Press
the top button to increase the volume, and
press the bottom button to decrease the
volume.
key to access the next
keys, with
buttons to adjust
15