Using Virtual Office - Nortel 1150E User Manual

Additional phone features

Using Virtual Office

Author's note:
The Feature spec for the 1150E only shows specs for a 2005,
I assume that this is the 1150E now. Does it still support Virtual Office? If so
there are new graphics needed for this section.
The Virtual Office feature provides a service you can use while you are
away from your desk to transfer calls, and all your office telephone
features, to a remote telephone. Virtual Office makes this possible by
allowing you to use another 1150E (the Remote phone) to log in to your
own home or office IP Phone (the Office phone). After you log in, you can
access the DNs, autodial numbers, key layout, feature keys, and
voicemail features that are configured on your own home or office IP
Phone.
To use Virtual Office, you need your DN and preconfigured Station
Control Password (SCPW). You must activate Virtual Office on your
Office phone before you can connect to it from a Remote phone. See
"Logging in to Virtual Office" on page 133.
Note: Consult your system administrator to verify if the Virtual Office
feature is available for your use.
You can use an IP Phone as a Remote phone to connect to your 1150E
even if it is a different IP Phone model. Table 4 shows the IP Phones on
which you can use Virtual Office to connect to your 1150E.
Table 4: Virtual Office connection availability
Using IP Phone
IP Phone 1120E
IP Phone 1150E
IP Phone 2001
IP SoftPhone 2033
IP Phone 2002
IP Phone 2004
Possible to log in to the 1150E?
Yes, with restrictions
Yes
Yes, with restrictions
Yes, with restrictions
Yes
Yes
132