Nortel 1150E User Manual page 23

Select
Note: The default configuration for Password Protection is off.
To turn Password Protection on or off:
Enter
About the Nortel IP Phone 1150E
7. Use the dialpad to enter the new
password.
8. Press the Select
new password.
Note: If you are locked out of your
IP Phone 1150E, or if you forget your
SCPW, contact your system
administrator.
1. Press the Directory
2. Press the Up/Down
scroll and highlight
Mode.
3. Use the dialpad to enter your password
(if Password Protection is enabled).
4. Press the Enter
5. Press the Up/Down
scroll and highlight one of the following:
— Enable Password Protection
— Disable Password Protection
soft key to accept the
key.
navigation keys to
Change Protection
soft key.
navigation keys to
23