While On An Active Call - Nortel 1150E User Manual

Your telephone's non-ACD call features
To answer a call:
2637

While on an active call

This section describes features that you can use while on an active call
on an Individual Line (DN).
To place a call on Hold:
Use the Hold feature when you are talking with one party and a second
call comes in on a second Individual Line (DN). You can answer the
second call and retain the original call by putting it on Hold.
1. Press the Individual Line
beside the flashing LCD indicator.
Note: If you have the handset option and
you pick up the handset, you must also
press the Individual Line (DN)
otherwise the handset is not operable.
However, you may terminate a call by
replacing the handset in the cradle.
1. Press the Hold
flashes beside the line on hold.
Note 1: If the Automatic Hold feature is
configured for your Meridian 1, the active
call is automatically put on Hold when
you answer the second call.
Note 2: The caller hears music while on
hold, if the Music on Hold feature is
configured for your system.
90
(DN) Key
Key,
Key. The LCD indicator