Table of Contents
Advertisement
7.2 Machine warnings
To view the machine alarms, press the
Select the
button to view the machine's current warn-
ings (see the list below).
Should any of these occur, call out the Technician by calling
the number shown on the display.
To exit, press the
button.
Warnings
Steam heating unit temperature
probe has overheated or short-
circuited
Steam heating unit temperature
probe is disconnected or cut off
Cup warmer temperature probe
has overheated or short-circuited
Cup warmer temperature probe is
disconnected or cut off
Steam nozzle probe has short-cir-
cuited
Steam nozzle probe is discon-
nected or cut off
Fillingup timeout warning
Select the
button to view the machine's alarm history.
To exit, press the
button.
Should an alarm occur, call out the Technician by
calling the number shown on the display and turn
off the machine.
40
104
of
button.
Fillingup timeout warning
Tel. 00000000000
Alarm
Warning data is corrupted
Change filter warning (90%
worn)
Filter completely worn
warning
Maintenance warning
Heating unit heating time-
out warning
Volumetric counter warning
for each group
1/1
24/01/17 15:09:29
100% filter regeneration
24/01/17 15:09:29
90% filter regeneration
7.3 Automatic steam wand temperature
Select the
button to programme the temperature of the
automatic steam wand:
• Use the
and
ature.
• To confirm, press the
• To exit, press the
HIGH TEMPERATURE HAZARD: Please remember
that a very high temperature can cause very seri-
ous burns.
CUP WARMER AUTOMATIC
STEAM WAND
arrows to set the desired temper-
button.
button.
65
°C
TECHNICIANS' manual
Advertisement
Table of Contents
