Introduction And Scope - peplink ONE 20 User Manual

USER MANUAL
Peplink Balance Series
1

Introduction and Scope

The Peplink Balance series provides link aggregation and load balancing across up to
thirteen WAN connections.
The Peplink Balance seriesoffers cost-effective solutions suitable for SOHO/power
users andsmall businesses. The Balance lineup also features a range of advanced
enterprise solutions. Peplink enterprise routersare idealsingle-box solutions for medium
to large business environments,andthey allow service providers to enable highly
available multi-network services.
The Peplink MediaFast series downloads and buffers video, audio, iTunes/iTunes U,
HTTP, and other content for uninterrupted learning and fun anytime.
This manual applies to the following Peplink Balance products:

Peplink Balance 20/30 (firmware version v6.1.x)

Peplink Balance 30 LTE (firmware version v6.1.x)

Peplink Balance 50 (firmware version v6.1.x)

Peplink Balance 210/310 (firmware version v6.1.x)

Peplink Balance 380 (firmware version v6.1.x)

Peplink Balance 580 (firmware version v6.1.x)

Peplink Balance 710 (firmware version v6.1.x)

Peplink Balance 1350 (firmware version v6.1.x)

Peplink Balance 2500 (firmware version v6.1.x)

Peplink MediaFast200/500 (firmware version v6.1.x)
The manual covers setting up your Peplink Balance or MediaFast and provides a
collection of case studies detailing theadvanced features of the Peplink Balance.
Important Note to Users Upgrading from Firmware 4.7 or below
If your current firmware version is 4.7 or below, please upgrade to Firmware 4.8.2 before upgrading to Firmware
6.1.
Important Note to Users of the Peplink Balance 30 (Classic Edition)
Firmware 5.0 or above is NOT applicable to the Peplink Balance 30 (Classic Edition). For more information
onidentifying the generation of your Peplink Balance 30, please visit our knowledge base at
<http://www.peplink.com/index.php?view=faq&id=231&path=16>.
http://www.peplink.com -7 / 258- Copyright © 2015 Peplink