Module Specifications - GE AKTApure User Manual

9.2 Module specifications

Introduction
This section specifies the operating data of the components in ÄKTA pure. For general data for the
system see System specifications, on page 411.
System pumps
Parameter
Pump type
Flow rate range
Pressure range
Viscosity range
Flow rate
specifications
ÄKTA pure User Manual 29119969 AB
Data
Piston pump, metering type
ÄKTA pure 25:
0.001 to 25 ml/min
(up to 50 ml/min during column packing)
ÄKTA pure 150:
0.01 to 150 ml/min
(up to 300 ml/min during column packing)
ÄKTA pure 25:
0 to 20 MPa (2900 psi)
ÄKTA pure 150:
0 to 5 MPa (725 psi)
ÄKTA pure 25:
0.35 to 10 cP (5 cP above 12.5 ml/min)
ÄKTA pure 150:
0.35 to 5 cP
ÄKTA pure 25:
• Accuracy: ± 1.2%
• Precision: RSD < 0.5%
(Conditions: 0.25 to 25 ml/min, < 3 MPa, 0.8 to 2 cP)
ÄKTA pure 150:
• Accuracy: ± 1.5%
• Precision: RSD < 0.5%
(Conditions: 1.0 to 150 ml/min, < 3 MPa, 0.8 to 2 cP)
9 Reference information
9.2 Module specifications
413