Available Curves - GE AKTApure User Manual

9. 1 1 Available Curves

The table below lists all available Curves for ÄKTA pure.
Curve
UV 1
UV 2
UV 3
Cond
% Cond
Conc B
System flow
System linear
flow
Sample flow
Sample linear
flow
PreC pressure
DeltaC pressure
ÄKTA pure User Manual 29119969 AB
Range
-6000.000 – 6000.000 mAU
-6000.000 – 6000.000 mAU
-6000.000 – 6000.000 mAU
0.00 – 999.99 mS/cm
0.0 – 100.0 %
0.0 – 100.0 %
0.001 – 50.000 ml/min (ÄKTA
pure 25)
0.01 – 300.00 ml/min (ÄKTA
pure 150)
cm/h
0.001 – 50.000 ml/min (ÄKTA
pure 25)
0.01 – 300.00 ml/min (ÄKTA
pure 150)
cm/h
-1.00 – 20.00 MPa (ÄKTA
pure 25)
-1.00 – 5.00 MPa (ÄKTA pure
150)
-1.00 – 20.00 MPa (ÄKTA
pure 25)
-1.00 – 5.00 MPa (ÄKTA pure
150)
Sampling Description
frequency
10 Hz The first UV/Vis absorbance signal
of the U9-M monitor.
2 Hz The 2nd UV/Vis absorbance signal
of the U9-M monitor.
2 Hz The 3rd UV/Vis absorbance signal
of the U9-M monitor.
5 Hz The conductivity signal.
1 Hz The conductivity signal as a percent-
age of a set range.
1 Hz The set concentration B or the cur-
rent value during a gradient.
1 Hz The set flow rate of the system
pumps.
1 Hz The set flow velocity of the system
pumps. Only available if a column
is selected.
1 Hz The set flow rate of the sample
pump.
1 Hz The set flow velocity of the sample
pump. Only available if a column is
selected.
1 Hz The pre-column pressure signal.
1 Hz The delta-column pressure signal.
9 Reference information
9.11 Available Curves
491