Connect Tubing To The Äkta Pure Instrument; Fraction Collector F9-C - GE AKTApure User Manual

3.2.4 Connect tubing to the ÄKTA pure instrument
Connect tubing
Fraction collector F9-C is delivered with all internal tubing in place. The tubing between the fraction
collector and purification instrument need to be installed.
Follow the instructions in the table below to connect the tubing from the ÄKTA pure instrument to the
fraction collector.
Step
1
2
3
ÄKTA pure User Manual 29119969 AB
Action
Connect the tubing Frac to the Frac port on the outlet valve on the ÄKTA pure instrument.
Connect the other end of the Frac tubing to the inlet port on the fraction collector.
Adjust the delay volume setting in UNICORN, see Section 9.8.8 System settings - Tubing
and Delay volumes, on page 460 for more details.
3 ÄKTA pure external modules

3.2 Fraction collector F9-C

3.2.4 Connect tubing to the ÄKTA pure instrument
103