Procedure For License Authentication - NEC N8100-1447F User Manual

Procedure for Modifying the Drive Letter
Be careful that the drive letter of the system or boot volume cannot modify with the following
procedure.
1.
Click Start menu, right-click [My Computer], and specify [Manage] to start
[Computer Management].
2.
Specify the [Disk Management] in the left side of the window.
3.
Right-click the volume you want to modify the drive letter and specify the [Change Drive
Letter and Path...].
4.
Click [Yes].
5.
Choose the [Assign a drive letter] and specify the drive letter you want to assign.
6.
Click [OK].
7.
If the following message appears, click [Yes].
Changing the drive letter of a volume may cause programs to no
longer run. Are you sure you want to change this drive letter?
8.
Close the [Computer Management].

Procedure for License Authentication

Product Key used in the procedure for license authentication should be matched with the COA label
in which the product key contained in Windows Server 2003 is written.
NOTES:
Execute the activation within 30 days. System may be locked after
30 days is passed.
COA label may be attached to your server.
Installing Windows Server 2003 x64 Editions D-11