Installing The Windows Server 2003 - NEC Express5800 User Manual

INSTALLING THE WINDOWS SERVER 2003

Express Setup proceeds the setup by specifying the necessary information on the wizard. You can
also save the setup information created on the wizard in a floppy disk as a setup file.
NOTES:
Prepare a floppy disk to use as Configuration Disk if you want to
save the parameters or use the drivers located on the "OEM-Disk
for Mass Storage Device" that ships with optional boards. When
using the floppy disk, the Express setup can continue the setup
without specifying the parameters.
The remote KVM console cannot use the mouse in Procedures 1-
14. Operate on the keyboard.
→ key: Used to move to the next screens.
← key: Used to return to the previous screen.
↑ ↓ key: Used to select a menu.
F1 key: Displays help.
ENTER key: Used to select [OK] or to decide each item.
ESC key: Used to select [Cancel].
1.
Turn the power of peripheral device on, and then turn on the server.
NOTES:
Do not mount an MO device on your server during the Windows
installation.
Do not connect the other hard disk drives except the drive that you
want to create as the Windows system drive.
If you create multiple logical drives in your system, refer to
"Reinstalling the operation system when multiple logical drives
exist" (Appendix B).
2.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the server.
3.
Press Ctrl, Alt, and Delete to reboot from the NEC EXPRESSBUILDER.
The system boots from the CD-ROM and NEC EXPRESSBUILDER starts.
4.
Click [Express Setup].
IMPORTANT: Express Setup overwrites the contents of you hard disk.
If you have data you want to keep, follow the directions on the screen
in Express Setup.
Installing the Operating System with Express Setup 5-9