Table of Contents
Advertisement
Spectral PC 400Z IP65
3. Built-in programs
With this menu, you can set the built-in programs.
01) While in main menu, press the UP/DOWN buttons to choose AUTO PROGRAM.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (AUTO.1-AUTO.10)
and 10 presets (PR.1-PR.10) which can be edited in Edit mode (see page 17).
04) Press the ENTER button to select the desired built-in program.
05) If you have chosen one of the programs (AUTO.1-AUTO.10), press the ENTER button to proceed to
the program speed settings.
06) Press the UP/DOWN buttons to set the program speed. The adjustment range is between 0-255, from
slow to fast.
07) The device will now run the desired built-in program.
4. Master/Slave Mode
With this menu, you can set the device as a slave.
01) While in main menu, press the UP/DOWN buttons to choose RUN MODE.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options: DMX and SLAVE.
04) If you have chosen DMX, the device is operating in DMX/Master Mode.
05) If you have chosen SLAVE, the device is operating in Slave Mode. It means that it will react the same
as the master device.
5. Personality (DMX channel modes)
With this menu, you can set the desired DMX channel mode (personality).
01) While in main menu, press the UP/DOWN buttons to choose PERSONALITY.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle through the following DMX channel modes:
HSIC:
9 channels
SSP:
9 channels
TOUR:
12 channels
TR16:
17 channels
Ordercode: 43554
16
Advertisement
Table of Contents
