Table of Contents
Advertisement
Media Panel 100 CCT
Static
In this menu, you can set the static colors to create an infinite range of colors.
Turn the Control wheel to scroll through the static colors (WW, CW) and STROBE.
Press the Control wheel to open the settings submenu.
Turn the Control wheel to increase/decrease the values.
●
Color intensity (WW, CW): the adjustment range is between 0–255, from low to high intensity
●
STROBE frequency: the adjustment range is between 0–25, from OFF to high frequency
Press the Control wheel to set the value and to move to the next setting.
DMX Address
In this menu you can set the device's DMX starting address.
Turn the Control wheel to set the desired DMX address. The adjustment range is between 001 and
504/507/510/511/512 (STD.P/VW.f/VW.D/DOS/UNO), depending on the currently selected DMX
channel mode.
Press the Control wheel to save the changes.
Run Mode
In this menu you can set the control mode of the device.
Turn the Control wheel to toggle between the following 2 options:
●
DMX: the device will operate in DMX Mode.
●
SLAVE: the device will operate as a slave in Master/Slave Mode. It means that it will react the
same as the master device.
Press the Control wheel to confirm your choice.
Personality (DMX Channel Modes)
In this menu you can set the DMX channel mode (personality).
01) Turn the Control wheel to select the desired DMX channel mode. There are 5 options available:
02) Press the Control wheel to confirm your choice. See page 31 for the DMX channel modes.
Product code: 33303
UNO:
1 channels
DOS:
2 channels
VW.D:
3 channels
VW.f:
6 channels
STD.P:
9 channels
27
Advertisement
Table of Contents
