18
ENGINE
185
18.5.13 Installing the shift shaft
-
Slide shift shaft
with the washer into the beari ng seat.
-
Push sliding plate
away from the shift drum locating unit. Insert the shift shaft
all the way.
-
Let sliding plate
engage in the shift drum locating unit.
-
Shift through the transmission.
18.5.14 Installina: the kickstaner idler a:ear
18.5.15 Installing the kickstaner shaft
18.5.16 Instalilna: the staner Idler a:ear
-
Slide on kickstarter idler gear
with the collar facing the engine case.
-
Slide on the disk. Mount the lock ring.
-
Slide the premounted kickstarter shaft
into the bearing seat.
•
Info
I
The kickstarter ratchet wheel
should not be in contact with stop plate
-
Turn kickstarter shaft
clockwise all the way.
-
Pretension kickstarter spring
,and attach and position spring hanger
-
Mount and tighten screw
.
Guideline
Screw, kick starter spring
M6
hanger
10 Nm
(7.4lbfft)
Loctile- 243'"
-
Slide on starter idler gear
with the collar facing the engine case.
-
Slide on the disk. Mount the lock ring.