Installing The Steering Arm - Yamaha E115A Service Manual

Installing the steering arm

1. Install the washer 1 and bushing 2 onto
the steering arm 3.
2. Place the swivel bracket 4 in an upright
position, and then install the steering arm
3 onto the bracket assembly.
3. Install the bushing 5, new O-ring 6,
bushing 7, and washer 8 onto the
bracket assembly.
61U5H11
4. Install the steering yoke 9 to the steer-
ing arm 3 by aligning the center a of the
yoke with the center b of the steering
arm.
NOTE:
Hold the steering arm after tilt up the swivel
bracket, and then strike the steering yoke
until the circlip installing groove visible.
5. Install the circlip 0.
0
6. Inject grease into the grease nipple until
grease comes out from both the upper
and lower bushings c.
5
6
7
8
6G470150
Upper case, steering arm
3
9
a
1
2
3
b
4
5
6S370020
6
7
8
9
7-18