Checking The Remote Control Cable (Remote Control Model) - Yamaha E115A Service Manual

GEN
INFO
Checking the remote control cable
(Remote control model)
1. Set the remote control lever to the neutral
position and fully close the throttle lever.
2. Check that the control lever 1 is in its
fully closed position, and check the
adjusting screw 2 is contact the stopper
3.
3
2
3. Fully open the throttle lever, and then
check that the control lever 1 is in its
fully opened position, and check the con-
trol lever contact the adjusting screw 4.
1-13
General information
1
61U10040
4
1
61U10050
4. Check that the remote control lever is in
the neutral position, and check that the
center of the set pin 5 is aligned with the
alignment mark a on the bottom cowling.
cC
The shift / throttle cable joint must be
screwed in a minimum of 8.0 mm (0.31 in)
b.
5
a
61U10065
b
6D430227
61U5H11