Ignition and ignition control
system
Checking the ignition spark gap
1. Disconnect the spark plug caps from the
spark plugs.
2. Connect a spark plug cap to the special
service tool shown as below illustration.
1
Ignition tester 1: 90890-06754
3. Crank the engine and observe the spark
through the discharge window of the igni-
tion tester. Check that the ignition system
if the spark is weak.
w
9 Do not touch any of the connections of
the ignition tester leads.
9 Keep flammable gas or liquids away,
since this test can produce sparks.
61U5H11
Checking the spark plug cap
1. Check the spark plug caps. Replace if
cracked or damaged.
2. Remove the spark plug cap 1 from the
spark plug wire 2.
61U80010
3. Check the spark plug wire. Replace if
cracked or damaged.
OK
61U80070
Ignition and ignition control system
1
1
2
6G480095
3
2
4
5
61U80190
6
7
61U80180
8
9
8-6