Registration Set Up General - KETRON SD9 Manual

The following screen is displayed –
•
Touch the REGS.SETUP (Registration Set up) to enter the registration set up screen where you can select
what settings registrations will load up and which will be ignored. The screen displayed will look similar to
this –
There are 2 columns displayed. The left column displays the 8 major functions while the right section
displays the individual sub features within the selected function which can be saved and recalled with a
registration (Yellow) or that will be ignored (blue). In the example above, in the GENERAL section, we
see that the Transposer and Slider values/levels will be saved within the REGISTRATIONS, However the
footswitch, Arabic, Control and Live Fx settings will be ignored. NB:- Just for clarification – if you
program the footswitches and save them in the footswitch menu, this means that even if you have different
footswitch settings in different registrations, those settings will be ignored as shown the example above in
Fig. 180. This would be a good example for live use – unless you do intentionally want to program
different registrations with different footswitch settings for different usages. In this case, you would turn on
(touch) Footswitch here so it is yellow. This setting would be great if you say play your SD9 Pro and in
some cases maybe use a Midi Guitar to control is and thus have different settings for the optional 4 switch
tonality pedal which maybe different than those of the optional FS6 or FS13 pedals you usually use with
the keyboard by itself.
KETRON SD9 Manual & Tutorial
Fig. 179. REGISTRATION SET UP
Fig. 180. REGISTRATION SET UP GENERAL
130