Footswitch Control & Settings - KETRON SD9 Manual

15. FOOTSWITCH CONTROL & SETTINGS
These are certain controls you can program such that you control them with the optional FS6 or FS13 Effects
Footswitch, thus freeing up your hands to simply play. You can for an example assign the Start/Stop to Switch #1,
Sustain to Switch #2, Vocalizer on/off to switch #3, voice change to switch #4 .. etc and in this way, you can
activate all these functions by pressing the corresponding switches and not lifting your hands off the keyboard to
touch on the panel.
To access the FOOTSWITCH page, press the MENU button
icon shown on the screen to display the following screen –

Now touch the switch you want to assign a function to (e.g. #10) and a drop down menu
showing all relevant functions you can program into #10 are displayed. You can use the
data wheel to scroll down the list to others not currently displayed on the page.

When you see a function you want, touch it and it is automatically assigned to that switch
(displayed right below it).

Press EXIT to get back to the main footswitch page and repeat the above for the other
switches you want to program. Please note that although the diagram shows the FS13, if
programming the FS6, use just the first row of switches (1-6) and ignore 7 – 13 at the
bottom!
KETRON SD9 Manual & Tutorial
and then touch the FOOTSWITCH
Fig. 207a. FOOTSWITCH
Fig. 207b. FOOTSWITCH - Selection
175