2Nd Voice Edit; 2Nd Voice Selection - KETRON SD9 Manual

This will open up another screen (Fig. 8) showing the current 2
nd
appropriate 2 voice can then be selected (just as was down above for the lead voice) – by touching the voice group
to the right side of the screen and touching which of the 12 voices displayed to the left of the screen you want to use.
Remember you can always turn the data wheel or touch the voice group once more to access even more voices
within this voice groups.
This method allows you to quickly change the 2
keyboard, this setting will be lost.
nd
To permanently edit the 2 voice and associate with any lead voice, you will have to go into the VOICE EDITOR.
•
From the voice selection screen, touch and hold the lead/main voice whose 2
seconds. A screen similar to this one below will be displayed that shows all the elements (individual voices)
that make up this voice (the voices used to create this lead voice you have selected will be turned ON as
shown on the far left On/OFF column).
nd
Fig. 9. 2 Voice Edit
•
nd
To select a new 2 voice for this lead voice, touch the current voice in the 2
Fig. 9 above. A screen similar to Fig. 10 above will be displayed. This screen shows the current 2
that is being used for this lead voice (left side – Grand Piano) and the voice group from which this voice
was selected (right side - PIANO).
•
You can now select your new 2
select the voice group (to the right) where you think your 2
left of the screen). If you do not see the voice you are looking for – turn the data wheel or press the
ENTER/PAGE button to display the next page of voices that exist in the current category/voice group.
There are many pages of voices per voice group which you can access this way.
•
When done, press the SAVE button (below the data wheel) to save your new USER VOICE and it's
nd
corresponding 2 voice (remember, you cannot over write the factory voices so whenever a modification is
made to a factory voice and you want to save it, it is saved as a USER VOICE. This therefore means that if
you go back and select this factory voice, the original 2
be there, and not yours).
KETRON SD9 Manual & Tutorial
nd
voice and what voice group it belongs to. The
nd
voice as you perform live - however, once you turn off the
nd
voice for this lead voice (as was done in the quick set up above), simply
nd
nd
voice that was assigned to it by KETRON will still
nd
voice you want to edit for 2
nd
Fig. 10. 2 Voice Selection
nd
Voice box (4
voice resides, then select that 2
th
row) shown in
nd
voice
nd
voice (to the
14