Playing/Layering 2Nd Voices Together (2 Voice); How To Change The 2Nd Voice Of Any Lead Voice; Touch 2Nd Voice Icon On Screen; Sound Selection For 2Nd Voice - KETRON SD9 Manual

2.B - PLAYING/LAYERING 2 VOICES TOGETHER (2
You can instantly add an additional voice to your lead voice - which we call 2
lead voice already has an additional voice assigned to it which you can quickly turn on/off by simply pressing the
nd
2 voice button on the panel. The 2
volume slider below it. Together with the RIGHT volume slider (for the lead/main voice) you can adjust how you
want both voices to sound relative to one another as each voice's volume is independent of the other for the SD9
PRO.
nd
Fig. 5. 2 Voice button and slider
2.C - HOW TO CHANGE THE 2
Assuming you're not satisfied with the factory's 2
nd
change the 2 voice of any lead voice and make it your own? There are 2 ways to change the 2
Preset/lead voice – one is quick and temporal, while the other method is permanent but requires you to go into the
voice editor.
The first quick method is to simply touch the 2
nd
Fig. 7. Touch 2 Voice icon on screen
KETRON SD9 Manual & Tutorial
nd
VOICE)
nd
voice's volume can be controlled by raising the corresponding 2
Fig. 6. 2
nd
VOICE OF ANY LEAD VOICE
nd
voices that have been assigned to the lead voice, how do you
nd
voice box from the main screen as shown below in Fig. 7.
Fig. 8. Sound Selection for 2
nd
VOICE. From the factory, each
nd
Voice Select
nd
voice of each
nd
Voice
nd
Voice
13