Assigning New Voice To Current Voice List Location; Using User Voices In Voice List - KETRON SD9 Manual

•
The SD9 PRO will quickly display the next screen which is the voice screen where the current voice
resides (the voice groups are to the right and voices to the left as usual). The VOICE LIST button will
now flash as you are in VOICE LIST EDIT mode.
•
Select the voice group to the right you believe your voice resides in and touch the voice with which you
want to replace the MUSETTE. In this case, we have touched the voice group ACCORDION and so it is
highlighted in yellow – while the left of the screen displays the first page of accordions.

Tips:-
in the voice group selection. Since you can layer voices and save as user voices, this
means you can create a voice list with voices that are instant layers of voices or voices
with new effects as edited in VOICE EDIT.

Touch the voice you want to use and it will be loaded into the voice location in question.
Remember more voices exist in the next pages, so turn the data wheel to display them.
•
Press EXIT once you have touched the appropriate voice. You will be returned to the VOICE LIST page
and guess what? Where your MUSETTE was, you should now find your new voice in the same location.
•
Repeat the above action – touch and hold a voice you want to get rid of/replace – go to the voice screen and
make a new selection of the voice you want in that location instead – press EXIT to return to the VOICE
LIST screen ... etc.
•
Remember the VOICE LIST is made up of 10 pages with each page being able to display 10 voices each –
so you can fill the VOICE LIST up with up to 100 of your favorite voices (you don't have to do this as just
10 voices in the first page may be sufficient ... but at least you know you can).
•
Once done, you will now need to SAVE your favorite voices (VOICE LIST) or else when you turn off the
SD9 PRO, they will be lost and you will have to do this all over again.
KETRON SD9 Manual & Tutorial
You can also use USER VOICES in the voice list. Simply press the USER icon
Fig. 38. Assigning new Voice to current Voice List location
Fig. 39. Using User Voices in Voice List
35