Audio Editor - KETRON SD9 Manual

change ...etc). Please refer to the manual of your Midi controller to set it up and the SD9 Pro Tables provided
separately to get the Sys Exec codes needed for such functionality. In this case, one you power on the SD9 Pro, you
won't need to touch it any more – simply control it from your controller by assigning its relevant functions to the
control knobs and sliders and buttons on your Midi controller!

11. AUDIO EDITOR

There is a built in Audio Editor that can be used to perform simple tasks on wave files such as creating loops,
normalizing, adjusting the volume ... etc. Prior to using the AUDIO EDITOR, you will have to first select a wave
file otherwise you will get a warning message to do just that. After selecting the song you want to work with (wave
format), simply press the MENU key again then touch AUDIO EDIT and an audio editing screen similar to this
will be displayed -
Fig. 204. AUDIO EDITOR
The wave shape of the file will be displayed at the centre of the screen. You can zoom in to get a closer look at the
sample or out with the functions ZOOM+ and ZOOM- on the display.
Press the red START button on the panel to play the file. A line moves progressively along the wave shape from
left to right representing where you are in the song.
-WAVE START: Takes the counter (line) to the beginning of the .wav file. You can use this to set which point you
want the song to start playing from (with the data wheel once selected). (NB:- If you want to cut out a portion of the
song, use this to set the start point of the song).
KETRON SD9 Manual & Tutorial
166