Style Editor-Copy - KETRON SD9 Manual

START/STOP red button and playing and changing chords just to hear how the arranger
will interpret the notes you just recorded in the key of "C" in the other keys played.

Press the EXIT button to return to the PARAMETER screen (Fig. 118 above).

SOLO:- Isolate this track (by muting all the others) so only what you are recording is
heard.
[CONTROLS]:- This provides additional control to bass or chord tracks (depended on which track was selected up
above in Section 2 of Fig. 111). These controls can be described as follows:-
- RESO – Defines the amount of resonance applied to the selected track.
- ARAIC SCALE – Enables (ON) or disables (OFF) the Arabic scale mode being applied to the selected
track.
- PITCH RANGE – Sets the range of the pitch bend wheel. The higher this value is, the more notes are
covered by the pitch wheel when moved up or down.
- Port. to Time – Use to set the Portamento time on the current track being recorded.
- Mod. To Filter – Enables (ON) or disables (OFF) the modulation effect filter on the current track being
recorded.
- Bend Assign – Here you can assign (Pitch, Rotor to chord 3 and Portamento). Rotor can only be applied to
chord 3 so when recording a style, reserve Chord 3 for Organ sounds!
[COPY]:- This provides the option to copy parts of an existing style into your edited or new style. In other words,
you can save yourself sometime and 'borrow' parts of an existing style and use in your style so that you don't have
to program the notes from scratch. This come in handy especially since it is sometimes impossible to program
"professionally" on the instrument and so copying these tracks from existing styles saves a lot of time and perfects
your style.
Touch COPY to display the following window shown in Fig. 120 below.
The screen shows the following information which can be used as described here:-
•
SOURCE:- This denotes the source of the style you want to copy parts from. Touch the SOURCE box and
select where the style whose parts you want to copy from reside (Factory, User or Modeling).
KETRON SD9 Manual & Tutorial
Fig. 120. Style Editor – COPY
82