Launchpad-Edit Pad Controls (Midi); Launchpad-Edit Pad Controls (Audio/Wave); Launchpad-Edit Pad Controls (Drum Kit); Play Mode - KETRON SD9 Manual

•
Touch EDIT PAD to display 5 rows of controls available for the current Pad.
Based on the content of the Pad you are trying to edit, your screen will either look like that shown
o
below in

Fig. 149a if the content of your selected pad is Midi data or

Fig. 149b if the content of your pad is Audio data – (since Chord Mode and re voicing
options are not available for Audio Content), or

Fig. 149c if the content of your selected pad is a drum kit (which gives you access to now
edit the pitch, filter and resonance of the selected drum kit). NB:- This applies only to
Midi drums kits and not Live Audio drums (which are treated as Wave/Audio files above
in 149b)!
Fig. 149a. LaunchPad - EDIT Pad Controls (MIDI)
OR ...
You will notice that the right side of the screen now shows you 5 rows of the various controls that can be
used to control the selected pad as follows:-
PLAY MODE. These govern how the pad plays. Touch each of the following icons to cycle
o
through the various play modes available.

Control #1
once through.
KETRON SD9 Manual & Tutorial
..OR..
- Determine if a pad should play continuously or only
•
LOOP:- Pad plays continuously unless you press the START/STOP button or
touch it to stop it. Once it gets to the end, it will automatically start over.
•
1 Shot:- Pad plays through only one time when engaged. Once it gets to the end,
it stops playing, unless you touch the pad once more.
Fig. 149b. LaunchPad - EDIT Pad Controls (Audio/Wave)
Fig. 149c. LaunchPad - EDIT Pad Controls (Drum Kit)
103