Microphone-Main; Microphone Presets & Settings In Detail - KETRON SD9 Manual

This microphone EDIT page shown above in Fig. 163 is made up of 2 main columns:-
•
MICRO (left) –These settings address the effects on the microphone. The ON/OFF button turns
the mic on or off (same effect as turning on/off the mic by pressing the MIC button on the panel).
Touch either of the silver knobs and turn them or the data wheel to adjust the microphone's Vol
(Volume), Rev (Reverb level) and Echo amounts. The values are displayed right next to each other.
6.A - MICROPHONE PRESETS & SETTINGS IN DETAIL
o There are 10 Factory and 10 User settings for the microphone. By touching the settings box
next to the On/Off button on the screen, a drop down menu displays all the 10 factory settings
as shown in this screen below –
o Simply turn the wheel to highlight the one you want and touch it (or press ENTER on the
panel – left side) to select it – and it will be displayed in the box. The user settings are below
the factory settings. If you EDIT any of the factory settings, they get stored in one of the 10
USER locations.
o If you touch EDIT, the SD9 PRO will now display the various effects processes used to
create the current Mic setting (Gate, EQ, Compressor .. etc) as shown in the screen below.
The status of these processes (ON or OFF) is also shown above their icons.
KETRON SD9 Manual & Tutorial
Fig. 163. MICROPHONE – Main
Fig. 164. MICROPHONE – Presets
118