Related Manuals for KETRON SD5
Summary of Contents for KETRON SD5
- Page 1 & ______________________________________ Istruzioni per l’installazione Installation guide ______________________________________...
- Page 2 - Don’t remove the screws to release the left endkey K – Togliere le viti del fissaggio della tastiera per SD5 e del supporto delle meccaniche per SD8 - Remove keyboard screws for the SD5 and support screws of the chromatic keyboard U - Togliere le viti per l’apertura del...
- Page 3 Ruotare il coperchio facendo attenzione a non sollecitare il cavo di collegamento con il fondo. Rimuovere la tastiera del SD5 scollegando le 3 piattine, per SD8 le piattine sono 2. Rotate the cover taking care not to disconnect any of the cables connecting the 2 parts.
- Page 4 (Registrations, Programms, etc.) mentre per il salvataggio del contenuto dell’HD utilizzare il driver “Disk to Fat Converter” disponibile sul nostro sito www.ketron.it Before installing the kit, copy all files such as: Registrations, Programs, etc. In order to save the content of the hard disk, download the software “Disk to Fat Converter” from our web site www.ketron.it...
- Page 5 Fig. 2 Collegare i cavi presenti nella scatola come segue (Fig. 2): Cavo schermato 6 vie A dal connettore JP3 del PB469 (USB & SD CARD READER) al connettore CN1 del PB412 (Pannello Comandi). Cavo schermato 6 vie G dal connettore JP2 del PB469 (USB & SD CARD READER) al connettore JP3 del PB430 (Generazione Suoni).
- Page 6 After installing the kit use a USB pen drive (formatted FAT32). Create a new folder “FLOPPY” and copy the files of the new SD5 or SD8 O.S. which is downloadable from our web site www.ketron.it...
- Page 8 KETRON s.r.l. Via Giuseppe Taliercio, 7 60131 Ancona ITALY...
Need help?
Do you have a question about the SD5 and is the answer not in the manual?
Questions and answers
I have a sd5 which has usb not disk where can I get information how to use it as the manual I have is for midi
To use the USB feature on the KETRON SD5 keyboard:
1. Use a pre-formatted USB drive to replace the original floppy disk functionality.
2. Download the free utility to a Windows computer to manage a library of 100 virtual floppy disks on the USB drive.
3. Format the USB drive as FAT32.
4. Create a folder named “FLOPPY” on the USB drive.
5. Copy the new SD5 operating system files to the “FLOPPY” folder.
6. Follow the instructions to load the system onto the keyboard.
This allows the keyboard to read and manage files as if using a floppy disk.
This answer is automatically generated