KETRON SD9 Manual page 11

be displayed on the screen – right section where the split value is currently being displayed. Release the SPLIT
button once set as needed.
Tips:- If you don't want a SPLIT point (while holding down the SPLIT button), you can also press the first key to
the left of the keyboard (E) and the entire keyboard will now be the lead/right voice.
The proper way however to ignore the split point would be to press the PIANIST button (left side of panel) and turn
it on, or press the HOME/STYLE button to turn it off (HOME mode).
This button automatically removes the SPLIT point and the entire keyboard becomes one ... (PIANIST MODE) -
with one voice/voices governed by the RIGHT/Lead voice selection. In this mode (PIANIST), you can then select a
voice or voices and play through the entire keyboard – just as you would do on a regular keyboard. In the PIANIST
mode, a musician can also play the arranger as a regular piano and still have the automatic accompaniment follow
along as they play (the keyboard follows you and not the other way around). This is discussed in more detail below
in section 4.J - PIANIST (page 68)
KETRON SD9 Manual & Tutorial
11