•
PC CONNECT:-
This is used to connect the SD9 pro to a computer to be used either as a MIDI in and out
cable together with an external sequencer software on the computer (such as Cubase or Cakewalk), or as a
data cable to transfer data between your computer and the SD9 Pro's internal storage device or devices
attached to it. The USB setting must be set under MENU – MIDI (as shown above on Page 164).
USB cable to be used as MIDI:- USB Midi icon should be on (yellow).
USB cable to be used as Data:- USB Midi icon should be off (not yellow).
•
Before using this function, make sure you have connected the SD9 Pro (using the usb connection
at the back of the SD9 Pro) to a computer (standard usb slot) using a standard USB Printer cable
as shown in Fig. 213a below.
•
Now touch the PC- CONNECT icon and the following screen should be displayed showing the
SD9 Pro is now connected to your computer.
•
When you are done, disconnect the USB cable that connects your SD9 Pro to your computer. Then
touch the PC-CONNECT icon once more. The SD9 Pro will pop up a message reminding you to
first disconnect the cable from the instrument before you proceed as shown in Fig. 213c below.
KETRON SD9 Manual & Tutorial
Fig. 213a. MEDIA – USB CONNECTION TO A COMPUTER
Fig. 213b. MEDIA – CONNECTED TO COMPUTER
183