Guitar Arp Selection; Voice Selection For Arps And Licks - KETRON SD9 Manual

•
The drop down menu shows the various Guitar groups from which you can select your Apr Guitars.
For this example, touch the first group (Ballad/Pop) to display the various Arps and guitar
arrangements in that group as shown below –
•
Touch one of the ARPs and it will instantly be loaded into CHORD 2 (it's name also displayed below
the CHORD 2 icon).
•
Since they are named generically (Arp01, Arp02 .... Etc), it would be wise to press the red
button on the panel to start playing the style (play a chord so the full arranger is playing) and as the
style plays, listen to each of these to see which one you want to use.
o For clarity, you can isolate/SOLO CHORD 2 by touching all the other style parts (red bar
below each style icon turns blue = off).
o You can also take this a step further and change the instrument used to create the ARP (in this
case the guitar). You may want to replace the STEEL guitar with another guitar or another
instrument from another category such as Brass or Piano. To do this, with CHORD 2 still
selected, simply touch the VOICE CHANGE icon to display the current instrument and it's
source –
o The part circled in
any of these where you believe the instrument you want to replace the guitar resides in. For
this example, we kept the guitar group and selected a new guitar – SOLIDBODY to the left
(in the part circled in
group). Press EXIT when done to return to the previous screen.
KETRON SD9 Manual & Tutorial
red (right of the screen) shows you the various voice groups. You can pick
green – which displays all the instruments within the currently selected
Fig. 96C. Guitar ARP Selection
START
Fig. 97. Voice selection for Arps and licks
71