Launchpad–Scene Copy Scene 4; Launchpad–Style Import - KETRON SD9 Manual


CLEAR:- This deletes the contents of all the pads within the current scene. Touch
'CLEAR' to start over. Touch 'Yes' in the next info message that pops up to confirm this
action.

STYLE IMPORT:- This is used to import style elements into your pads. You will
quickly realize that KETRON may already have a sequence for you either in their
massive MODELING library (as already mentioned above) or within their professional
styles and beats from which you can 'borrow' and use in your LaunchPad project so as to
save time and not have to re-invent the wheel. This comes especially handy when dealing
with Drums, Bass lines, horn lines, piano riffs, guitar strums ...etc which are rather
difficult to program outside of a professional Midi sequencer software. Let the SD9 Pro
handle this for you. You can thus import Drums, Grooves, Bass and Chord parts of the
current style into your current LaunchPad scene.
KETRON SD9 Manual & Tutorial
•
Tips:- As you go back and forward between scenes, you will realize that the
status of each pad is also memorized. So if in scene 1, you had pad #1 off and in
scene 3 Pad#1 is on, when you go to scene 3, pad #1 will play, but when you
return to scene 1, Pad# 1 will be off – until you touch it and turn it on manually.
This is very useful when you want to switch between scenes and have certain
pads muted, thus creating a greater musical ambiance and live effect!
•
Touch 'Style Import' to open up the next screen (as shown below in Fig. 157).
Fig. 157. LaunchPad – Style Import
Fig. 156c. LaunchPad – Scene COPY Scene 4
112