Saving Factory Voice; Playing 2 Voices With Your Left Hand (Lower Voices); Style Selection Screen; Style View Screen - KETRON SD9 Manual

•
SAVE:- Saves this new voice in the USER VOICE section with the same name as the factory voice.
•
SAVE AS:- Allows you to name this new voice and save in the USER VOICE section when you press
ENTER (after naming it).
•
CANCEL:- Cancels all changes and reverts to the VOICE EDIT screen you just came from. If you press
the EXIT button on the panel, all settings are restored and the keyboard returns to the voice selection
screen.
To over write the factory voice with your new voice, do not press the SAVE button when done. Instead,
touch the FACTORY OVERWRITE icon on the screen – then confirm if you want to proceed or not.
Fig. 19b. Saving Factory Voice
2.E - PLAYING 2 VOICES WITH YOUR LEFT HAND (LOWER VOICES)
With the keyboard in SPLIT mode, you can also assign up to 2 separate voices and play them together or separately
on the left side of the keyboard as well. These voices are usually determined by the style that is currently being used,
but we will show you how irrespective of the style selected, you can call up and use voices to the left of the SPLIT
point of the keyboard.
•
First make sure your SD9 PRO is displaying the default screen (screen it powers on with or similar. If not,
simply press EXIT repeatedly until you get there). Your screen should look like this:-
Fig. 20. Style selection screen
KETRON SD9 Manual & Tutorial
Fig. 19c. Saving Factory Voice
Fig. 21. Style View screen
21