Style Editor–Copy Section; Style Editor–Copy Part; Style Editor-Copy Execute - KETRON SD9 Manual

•
STYLE:- After selecting the FAMILY where the style resides, touch STYLE icon (Fig. 126 above) to
display the list of available styles. Use the data wheel and scroll through all the available styles from which
you can select the style you want copy parts from by simply touching it. The selected style will be
displayed in the STYLE icon box shown in Fig. 124.
•
SECTION:- Once the style has been selected, you can now select what section or track of the style you
want to copy (such as Arranger A, B, C, D, Fill in, Intro ... etc) as shown in Fig. 125 below.
Fig. 125. Style Editor – COPY Section
PART:- With the appropriate section selected above (in Fig. 125), now go ahead and select the part or
track you want to COPY from by touching the PART icon and scrolling through with the data wheel
which part you want (Drums, Bass, Chords) as shown in Fig. 126 above.
•
Once you have selected the appropriate track you want to copy from the appropriate style, your screen
should look similar to that below in Fig. 127. Touch the EXECUTE icon to perform the actual copy
operation.
•
You can now repeat the COPY process above to copy other style parts. Please note that you can assemble
an entire style from scratch by simply copying parts (e.g. Drums from 8Beat 1, Bass from 16Beat_3, Chord
1 and Chord 2 from 8Beat 3, Chords 4 and 5 from Country 4, the entire Arranger B and C from 16Beat 4,
... etc).
[CLEAR]:- Unless you're a musical genius, chances are you will make some mistakes along the way as you record.
No problem! You've now have 2 ways out. The first way out is using the CLEAR icon as shown in Fig. 128 below.
KETRON SD9 Manual & Tutorial
Fig. 126. Style Editor – COPY Part
Fig. 127. Style Editor – COPY EXECUTE
84