Launchpad–Live Effects Filters; Exporting Styles To Launchpad Project - KETRON SD9 Manual

•
A 2 dimensional graph will be displayed on the right side of the screen as shown below in Fig. 160b.
•
Touch and move the blue ball within the graph to alter the Filter and Resonance characteristics of the
Assigned pads.
Fig. 160b. LaunchPad – Live Effects
•
You can touch "Assign To" and assign which pads the filter will impact. From Fig. 160c, you can see that
Pads 1, 3, 4 and 7 will be impacted by the effects of the Live Filter. Note that whatever assignment you
select for a wave pad will impact all the pads that contain wave data! Therefore, if you turn off say pad 6
(Vocal_128), then Pads 2 and 8 will also automatically be turned off. This is also true when applying
REVERB to individual pads (all pads with wave share the same reverb settings) as mentioned above in
FIG. 157 above on PAGE 113.
5.E EXPORTING STYLES TO LAUNCHPAD PROJECT
You can quickly export all your style variation parts (Arranger A, B, C and D) into a LaunchPad project (Scene 1, 2,
3 and 4 respectively). This allows you to use your style parts within scenes of the LaunchPad and thus build your
project from this starting point. To do so, simply select the style whose arrangements you want to use, and while the
style is playing, press the LAUNCHPAD button. The style parts will now be imported into the LaunchPad as shown
below in Fig 160d.
KETRON SD9 Manual & Tutorial
Fig. 160a. LaunchPad – Live Effects
Fig. 160c. LaunchPad – Live Effects Filters
116