Microphone-Edit-Noise Gate; Microphone-Edit-Eq - KETRON SD9 Manual

o You can then make changes to these parameters and save as a USER MIC setting. So for an
example, if you want to make changes to the Noise Gate, touch the current selection (Soft)
below the Noise Gate icon to display a list of selectable Noise Gate settings.

o To view or modify the current EQ settings, touch VIEW on the screen and modify as you see
fit to your voice – by touching and turning your finger on the screen or the data wheel.


KETRON SD9 Manual & Tutorial
Touch the Noise Gate setting you want and press EXIT on the panel (right side) to
return to the Mic Edit screen.
If you want to make your own EQ setting and save for future use, touch the current
EQ setting box below the EQ graph from the previous screen (Studio as shown in
example above).
Turn the data wheel and select any User EQ (1-4) below.
Fig. 165a. MICROPHONE – EDIT
Fig. 165b. MICROPHONE – EDIT –Noise Gate
Fig. 165c. MICROPHONE – EDIT –EQ
119