Block Registrations; Single Registration - KETRON X1 Owner's Manual

REGISTRATION
The Registration function consists of the global saving of the general status of the instrument with its main
functions. Two types of Registrations are available on the X
series: Block Registrations and Single Registrations.
The selection between the 2 types is achieved in the
following manner:
1 - Press key F3 - Utility
2 - Press Page >
3 - Press key F8 to select Block or Single.

Block Registrations

The Block registration concerns the entire block of 198
Registrations within the instrument, split up into 2 Banks of 99 registrations each (A and B). The Block
mode will be that enabled when the instrument is turned on. All the external panel commands together with
their relative functions may be programmed in Registration and also the internal parameters of the various
operational menus. The selection is made, as for the Styles, by means of the numerical keyboard from 0 to 9.
To save a Registration: supposing we have already set the instrument panel as desired, having
selected the Style and modified the Tempo, Volumes, Sounds etc..
To save, simply:
1 - Press Save / Enter.
2 - Press F 1- Registration.
3 - Use the keyboard 0 – 9 to select the destination number of the Registration and the A/B key
to select the Bank. A name may also be given to the Registration by writing the letters using
keys C 2 to F 5 and shifting the sector using Cursor < > .
4 - Press F 10 – Save to confirm.
The Registrations thus saved are stored in the memory even after the instrument has been switched off.

Single Registration

The Single Registration is a Registration exactly the same as the internal Registrations of the Block
Registrations group, with the exception that it is controlled via Disk only (Hard or Floppy) and the-
refore is saved and called-up from Disk individually, one at a time. (The Single mode is selected in
the manner described at the beginning of the Registration chapter).
How to save a Single Registration on Disk (after having set the instrument panel in the mode desired):
1 - Press Save/Enter
2 - Press key F1 - Registration
3 - Name the Single Registration
4 - Select the folder of destination by means of the nume-
ric keypad 0-9
5 - Press key F10 to confirm
The Single Registrations are saved on Disk in alphabetical
order and with their individual progressive number. To call them up, merely type-in the number using the
keyboard from 0 to 9. Unlike the Block Registrations, the number of the Single Registration is made up of
3 figures which allows, for example, up to 999 Single Registrations to be sent to a single folder of the Hard
Disk. For numbers made up of 1 to 2 figures simply type-in only the single figure or the 2 relative figures.
If there are files.TXT or Midifiles on the Disk bearing the same name as the Registration, the homonymous
text file as well as the Song will instantly be loaded together with the Single Registration. To activate the
Song, just press the Song Play button and Start. These functions are most definitely useful for musicians
who love performing live using the Styles, because they allow them to manage the Style, the sound of the
Song, the song lyrics and the Midifile using just the one Single Registration.
55