KETRON SD9 Manual page 73

You can see all the relevant parts that make up the style on the left side of the screen. They are labeled as such:-
o
LD:- Live Drums
o Dr:- Midi Drums
o Grv:- Groove
o Bs:- Bass
o 1 - 5:- Chords 1 – 5
o Lg:- Live Audio Guitar
o Low1, 2:- (Lower 1 and 2 voices)
NB:- Touching these once turns the track on (red) or off (blue), but touching and holding down an icon (e.g. Dr.
or LD) for 2 seconds allows you to change the content of the track with the new modeling information!
These are the parts you can modify and replace with hundreds of other style-templates that KETRON has provided
for use in each section – so you have different templates for Live Drum, Audio Drum, Groove (percussion), Bass,
Piano, Orchestral, Guitar and Live Guitar which are shown on the right side of the screen. Best of all, you can also
introduce Live Audio drums and Live Audio Guitars to any style using this MODELLING tool.
At this point, it will be smart to press the red START button to start playing the style so you hear how it is currently
(with no adjustment) and then adjust as suggested below.
Want to go ahead and introduce a Live Audio Drum into this style? Simply touch and hold down the DRUM icon on
the screen for 2 seconds. The right side of the screen displays "LIVE DRUM", and below it, the option to open up
the LIVE DRUM library is available. To display the various Audio Live Drums (names ending with a bpm number
and "(L)" for LIVE), touch and hold down the Live Drum (Ld) track for 2 seconds to open up the Live Drum
Library as shown below.
KETRON SD9 Manual & Tutorial
Fig. 99. Style Modeling
Fig. 100a. Live Drum Selection
73