Overview
March 2017
2.5
Installation procedure
Follow these steps for a proper installation:
Review installation considerations.
See
If needed, install modem cards to support the
desired communication protocols.
See
Mount the Rosemount 2460 System Hub.
See
Wire the Rosemount 2460.
See
Make sure covers and cable gland/ conduit
connections are tight.
Power up the Rosemount 2460.
Configure the Rosemount 2460.
See
- Enable communication with host system
- Configure ports
- Configure Tank Database
Verify operation.
Enable the Write Protection switch if required.
20
"Installation considerations" on page
"Exchanging a modem card" on page 102
"Mechanical installation" on page
"Electrical installation" on page
Section 4:
Configuration:
23.
25.
28.
Reference Manual
00809-0100-2460, Rev DB
Overview