Emerson Rosemount 2460 Reference Manual page 36

Installation
March 2017
4. Attach the Rosemount 2460 to the wall. There are four holes on the housing to be used for the
screws. The required screw dimension is given by
A. Holes (x4) for attaching the system hub to a wall
B. Communication board compartment
C. Lock ring
5. Ensure that the Lock ring (C) on the cover to the communication board compartment is folded so that
it does not prevent the lid from being properly closed. Close the lid and ensure that it is fully engaged
to prevent water from entering the terminal compartment. Torque the two screws to 4Nm (35 in.-lb).
26
B
A
A
Figure 3-2 on page 27.
C
A
Reference Manual
00809-0100-2460, Rev DB
A
Installation