Advertisement
Quick Start Guide
2
Mechanical installation
2.1
Mounting considerations
Before mounting the level switch on a silo (or other vessel), review the safety
and pre-mounting sections.
2.1.1
Safety
General safety
1. Installation of this equipment shall be carried out by suitably trained
personnel, in accordance with the applicable code of practice.
2. If equipment is likely to come into contact with aggressive
substances, it is the user's responsibility to take suitable precautions
that prevent it from being adversely affected, thus ensuring the type
of protection is not compromised.
3. It is the responsibility of the installer to:
4. Technical data
Hazardous area safety
The Rosemount 2535
instructions and control drawings for hazardous area installations. See
Emerson.com/Rosemount
8
a. Aggressive substances: e.g. acidic liquids or gases that may
attack metals or solvents that may affect polymeric materials.
b. Suitable precautions: e.g. regular checks as part of routine
inspections or establishing from a material's data sheet that it
is resistant to specific chemicals.
a. Take protective measures, such as fitting an angled shield
(reverse V shape) to the silo or selecting an extension tube
option, when there are high mechanical forces.
b. Ensure that the process connection is tightened by the
correct amount of torque and sealed to prevent process
leaks.
a. The Rosemount 2535
specifications. See
language versions.
Product Certifications document
for other language versions.
Product Data Sheet
Emerson.com/Rosemount
October 2019
has all the technical
for other
has safety
Quick Start Guide
Advertisement
