Installation Procedure - Emerson Rosemount 2410 Manual Supplement

Tank hub upgrade instruction for primary bus and secondary bus

Hide thumbs Also See for Rosemount 2410:

Manual Supplement

00809-0200-2410, Rev AA

1.2

Introduction

This instruction describes how to upgrade a Primary/Secondary Fieldbus on existing 2410

Tank Hub.

Note

The upgrade must be documented. This includes stating the serial number of the device,

date of upgrade, type of upgrade and name of the person performing the upgrade.

1.3

The upgrade kit

The modification kit consists of the following parts:



1.3.1

Tools

The following tools are required



1.4

Installation procedure

When upgrading the 2410 Tank Hub, make sure to follow and observe local safety

regulations when working with electrical equipment within the hazardous locations.

Always make sure to have the necessary site permissions before starting any kind of work

within the hazardous locations. If unsure, consult the local personnel on site.

Rosemount 2410 Tank Hub

Screw M36

Plate for Main Label

Main and Spare Part Label

PCM Modem Board (if applicable)

Start Code (if applicable)

A small screwdriver used for disconnecting the cables from 2410.

A torx T-20 screwdriver for dismounting the 2410 device.

Rosemount 2410 Tank Hub

November 2015