Emerson Rosemount 2460 Reference Manual page 67

Reference Manual
00809-0100-2460, Rev DB
Step 3. Port configuration
1. Verify that the correct modem
communication ports are properly configured. Normally there is no need to change any
communication parameters. Standard configuration is automatically set for each modem type.
a. Modem. The Rosemount 2460 supports a large number of modem types. Verify that correct
b. Port Type. The Rosemount 2460 has eight communication ports. They are normally configured
c. Protocol. The Modbus protocol is the standard option in Rosemount Tank Gauging systems.
d. Settings. Verify the communication parameters. Default communication parameters for
1. See "Exchanging a modem card" on page 102
Configuration
modem is installed on each port to be used. See
for details on available modems and protocols.
as six Field ports and two Host ports. Host ports can be connected to TankMaster work stations
as well as other hosts.
The Field ports are connected to Rosemount 2410 Tank Hubs and other supported field devices.
See also "Connecting to the Rosemount 2460 System Hub" on page
However, other protocols are supported as well. See
Data.
Rosemount 2460 Host and Field ports are shown in
for instructions on how to change a modem card.
(1)
(TRL2, RS485, Enraf, Digital Current Loop (DCL)) is installed, and
Appendix A: Specifications and Reference Data
30.
Appendix A: Specifications and Reference
Table 4-1 and Table 4-2 on page
Configuration
March 2017
58.
57