Reference Manual
00809-0100-2460, Rev DB
When a servo command is sent, the Level /Displacer position field in the Servo Command window turns
orange and the servo state is displayed to the left of the Level /Displacer position value as an abbreviation:
Servo Command
Freeze (Block)
Park (Lock/Stow)
Test
Search for water level
Water level found
Density scan active
3. Before you close the Servo Command window, verify that the servo command indicator next to Level
/Displacer pos. field is cleared, e.g. the T for Test is not visible.
4. Click Close.
Servo Commands
Abbreviation
F
P
T
D
W
R
Servo Commands
March 2017
163