Reference Manual
00809-0100-2460, Rev DB
6.9.1
To stop logging
To stop communication logging:
1. Make sure that all ports are disabled, i.e. all check boxes are unchecked. Also make sure that Modbus
TCP logging is set to None:
2. Click the Apply button.
Note
Modbus TCP does only appear in case the current license includes Modbus TCP Host Communication.
See
"Ordering table" on page
Note
Logging will stop temporarily in case a USB stick or SD card is umounted, Logging will be resumed when
the USB stick /SD card is replaced again.
Service and Troubleshooting
151.
Service and Troubleshooting
March 2017
113