Emerson Rosemount 2460 Reference Manual page 65

Reference Manual
00809-0100-2460, Rev DB
How to check Communication Channel and Port
To check which channels are enabled:
a. In the WinSetup workspace open the Protocols folder.
Protocols folder
b. Expand the master protocol folder (ModbusMaster in this example).
c. Check that the desired channel is enabled. In the example above the Modbus Master Channel 1 is
To check which communication port that is associated with a certain channel:
a. Right-click the desired protocol channel icon and choose Properties.
Communication
port on the
TankMaster PC
b. Open the Communication tab and check which communication port that is selected. This
See the Rosemount Tank Gauging System Configuration Manual (Document no. 00809-0300-5100) for
more information on how to configure communication protocols.
Configuration
enabled. Disabled channels do not appear in the protocol folder.
example shows that port COM1 is used for Protocol Channel 1.
Modbus Master protocol folder
Modbus Master channel 1
Configuration
March 2017
55