Local Access; Language - Siemens Sitrans LR200 Instruction Manual

6.2. Local Access

6.2.1. Write Protect
Note: This lock affects only the handheld programmer. A remote master can
change configuration if Access Control (6.1.1.) is set to allow this.
Prevents any changes to parameters via the handheld programmer.
Options
• To turn Lock On, key in any value other than the Unlock Value stored in PIN
to Unlock (6.2.2.).
• To turn Lock Off, key in the Unlock Value stored in PIN to Unlock (6.2.2.).
6.2.2. PIN to Unlock
Notes:
• Do not lose your Unlock Value: it cannot be displayed once Write Protect
(6.2. 1 .) has been set to a different value.
• Valid only for operation via the handheld programmer.
• A reset to Factory Defaults will not restore the unlock value at time of
shipping.
Stores the value to be entered in Write Protect (6.2.1.) to unlock programming.
If Write Protect (6.2.1.) is set to a different value PIN to Unlock (6.2.2.) does not
display the Unlock value
Handheld
Programmer
Values

7. Language

Selects the language to be used on the LCD.
Options
Page 110 SITRANS LR200 (HART) – INSTRUCTION MANUAL
Range: 0 to 99999
stored in PIN to Unlock
Unlock value (
*
(6.2.2.)
Any other value
Range: 0 to 99999
Value when shipped: 1954. Not restored by a reset to Factory
Defaults.
– – – –
*
English
Deutsch
Français
Español
Lock Off
Lock On
Display when Lock is on
7ML19985JP02